Superstick Door & Window Flashing Tape
Marshall Innovations SUPER-STICK Building Tape® is a high performance window and door flashing tape designed to be installed down to -6⁰C.
It is a flexible flashing tape used around framed joinery openings as a secondary weather resistant barrier. No more issues regarding adhesion in the cool of winter or heat of summer.
SUPER-STICK Building Tape utilizes a high tack pressure sensitive adhesive (PSA) combined with a high performance toughened film. Available in 75mm, 150mm & 200mm x 23m rolls
Features & Benefits of Flashing Tape
- Can be installed in extremely cold conditions to -6⁰C
- Easy to install peel-and-stick application
- UV resistant rating for 90 days
- Will not react with sealants & no plasticizer migration. Marshall Innovations recommend checking with sealant manufacturers for suitability.
- Can be used with rigid air barrier systems
- Split liner for easy install
- Can be installed in very hot conditions
- Extremely high puncture resistance & tensile strength
- Residential & commercial applications
- Very thin & no build up & won’t affect cavity battens or window installation
- Clean & green tape. Contains no VOC’s, HFCC’s or CFC’s.
- BRANZ Appraised #846 (2013)
- Forms part of the Tekton Weatherization System BRANZ #621 (2014)
Note: Protecto SUPER-STICK Tape can be applied in extremely cold weather; however, Marshall Innovations do not recommend applying tapes below 0⁰C due to health and safety reasons.
- Can be installed in extremely cold conditions to -6⁰C
Super-Stick flashing tape – Sill Installation
PDF Downloads
Frequently Asked Questions
What is Superstick Door & Window Flashing Tape used for?
It's a flexible flashing tape installed around framed joinery openings as a secondary weather-resistant barrier, sealing the junction between windows, doors, and the surrounding wall underlay.
Can Superstick be installed in cold weather?
Superstick is designed to install down to -6°C. Marshall Innovations doesn't recommend applying tapes below 0°C generally, for health and safety reasons on site.
Will Superstick react with sealants?
No known issues when using sealants to form a wet seal over SUPER-STICK’. Marshall Innovations recommends checking with sealant manufacturer for compatibility. See online for approved sealants.
Will Superstick react with WATERPROOFING MEMBRANES
When applying SUPER-STICK over any decking membrane it is critical to check with the membrane supplier to ensure there won’t be any compatibility issues. Marshall Innovations can typically provide a solution.
What sizes does Superstick come in?
75mm, 150mm, and 200mm widths, all in 23m rolls.
Can Superstick be used with rigid air barrier systems?
Yes. It's compatible with rigid air barrier systems as well as flexible wall underlays, however always check with rigid air barrier supplier to ensure compatibility.
How is Superstick installed?
It's a peel-and-stick application with a split liner for easier handling on site, using a high-tack pressure sensitive adhesive combined with a toughened film.
How long can Superstick be exposed before cladding is fitted?
Superstick carries a 90-day UV exposure rating. Over James Hardie rigid air barrier (RAB), it can be exposed for up to 180 days.
Is Superstick BRANZ appraised?
Yes, BRANZ Appraisal #846 (2013), and it also forms part of the Tekton Weatherization System under BRANZ #621 (2014).